Assembly Instructions (End Table)

Turn right (clockwise) to tighten
I.
Prepare 8 bolt assemblies
by
inserting FIRST the lock washer
(#B) onto the bolt (#A) and then
the flat washer
(#C) onto
the
SAME
bolt (#A), in that order
.
II.
Align the long sides of the 4 L-
brackets (#E) with the pre-drilled
holes on the shelf (#2). Insert 4
bolt assemblies through the long
sides of the L-brackets (#E) and
secure those bolts using the
Allen wrench (#D) to lock them
with the shelf
(#2).
III. Align the 4 stands (#3)
with the
short sides of the 4 L-brackets
(#E) assembled on the shelf
(#2).
Insert 4
bolt assemblies
through the short sides of
the L-
brackets (#E) and secure those
bolts using the
Allen
wrench
(#D) to lock them with
the
stands (#3).
I.
Align the base (#4) with the pre-
drilled holes on the stands (#3).
II. Prepare 4 bolt assemblies
by
inserting FIRST the lock washer
(#H) onto the bolt (#G) and then
the flat washer
(#I) onto
the
SAME bolt
(#G), in that order
.
III.
I
nsert the bolt assemblies
through the base (#4) and
secure those bolts using the
Allen wrench (#J) to lock them
with the stands
(#3).