Thank you for your purchase! We hope you enjoy this new addition to your home for many years to come. Our commitment to providing quality products does not simply end when you purchase our product. We fully stand behind our products from start to finish. We can help with assembly questions as well as, if necessary, replacing damaged or missing parts. To help expedite our service, please have these assembly instructions readily available, along with your order receipt.
/7
Stand Bolt 1/4”x3/4” Lock Washer 1/4” Bolt 5/16”x2” Threaded Stud Flat Washer 1/4” Lock Washer 5/16” Flat Washer 5/16” Allen Wrench M5 Spacer
I. II. Turn right (clockwise) to tighten III. I. II. III. Align the base (#4) with the predrilled holes on the stands (#3). Prepare 4 bolt assemblies by inserting FIRST the lock washer (#H) onto the bolt (#G) and then the flat washer (#I) onto the SAME bolt (#G), in that order. Insert the bolt assemblies through the base (#4) and secure those bolts using the Allen wrench (#J) to lock them with the stands (#3).
#K I. II. Carefully place and center the glass top (#1) over the spacers (#K). Make sure the table is rested on a flat surface and does not feel loose or wobbly. If it does, double check that the bolts/screws are secured and properly tightened. Insert the 4 threaded studs (#F) into the top of the stands (#3). Then insert the 4 spacers (#K) onto the 4 threaded studs (#F).
