Owner's Instructions Manual

Part E.
This next step guides you to connect the Fire Table / Column Regulator to the Gas Cylinder.
User's Guide : Connecting the Fire Table / Column to the Gas
Cylinder.
Step 1 : Plug the Black Coupling Nut on the
Regulator to the Cylinder Valve.
Step 2 : Turn the Black Coupling Nut, fully
CLOCKWISE until fully locked into the position.
Step 3 : Check for Leaks by : Brush some soap and
water mixture on all connections.
Turn the gas supply on;if extra large bubbles form
on any connection there may be a leak. If you smell
gas or a leak is discovered, IMMEDIATELY turn the
gas valve off, disconnect Propane Gas tank.
Do not use the appliance until the leak is repaired
Part D.
User's Guide : Loading of Gas Tank into the Fire Table /
Column.
Fire table must be 60 inches away from the gas tank
Please be careful not to trip over the gas pipe