Installation & Assembly

Parts List

1 x Seat

1 x Back

1 x Power Kit

2 x Legs

Lift Recliner Assembly Instructions

- Your recliner comes packaged in one box.

- DO NOT use any sharp objects to open plastic wrapped components as damage

to product or components may result.

- Carefully remove all of the components from the packaging and

set aside for assembly.

- Assemble on a soft surface to prevent scratching the finish.

- Zip ties are used to secure your recliner cords and avoid damage - do not cut.

Step 1

Step 2

Back

Assembly

4 x

Bolts

4 x Wing Nuts

M6 x 40mm

Hardware bag can be found

under the seat.

Hardware List

Replaceable Parts

4 x Lock Washers

X 2

PAGE 1
Lift Recliner Assembly Instructions - Your recliner comes packaged in one box. - DO NOT use any sharp objects to open plastic wrapped components as damage to product or components may result. - Carefully remove all of the components from the packaging and set aside for assembly. - Assemble on a soft surface to prevent scratching the finish. - Zip ties are used to secure your recliner cords and avoid damage - do not cut.
PAGE 2
Assembly Step 4 Step 3 B A C Remote Use Step 5 Hold the Up button to lift chair / bring the recline position upright Hold the Down button to recline / bring lift position down
PAGE 3
Proper Usage Steps to safely stand up from your Lift Recliner 1. Store remote safely in the recliner’s side pocket 2. Plant feet firmly on the ground 3. Evenly distribute weight on both arms of the chair 4. Slowly stand up from lift position *Remember to store remote safely in the recliner’s side pocket when it is not in use *Fabric will fade or discolor in direct sunlight. Minimize exposure to direct sunlight to extend the life of your furniture.