Caution : You must read this before you proceed LOUNGE Picture Label Picture Description QTY A Seat Panel 1 B Left Arm 1 C Right Arm 1 Page 1 OF 5
Label Picture Description QTY ① Bolt (M8x50mm) 5 ② Washer (M8) 5 ③ Allen Key (M10) 1 Before Beginning Assembly: Page 2 OF 5
Overview Right Arm(C) Left Arm (B) Seat Panel (A) FRONT FACING This Lounge has multiple parts and may require up to 15 minutes to assemble. To give you an overview of the Lounge parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Put the one side of the Lounge as pictured on a clean, non-marring surface.
Step 2 Seat Panel (A) ② Right Arm (C) ① Left Arm (B) Open the back, Attach Right Arm and Left Arm to the Seat Panel using Bolts (①) , and Washers (②), with Allen Key (③). Step 3 Adjust the adjustable tube of the back, to find the suitable height. Your Lounge is ready for use. This Lounge can only be used on a flat, level surface. Step 4 Your Lounge is ready for use.
Page 5 OF 5
