Assembly Instructions

Step 5
Cover the bottom of the Chair Seat(A) with the non-woven fabric.
Smooth down the Magic Tape on all four sides of the Seat by hand.
Install the Legs(D) into the bottom of the Seat(A) by placing a Washer
Ring(①) onto the threaded stem of the Legs.
And then insert the threaded stem into the threaded mounting position at
each Corner of the Bottom of the Seat(A).
Tighten by turning the Legs clockwise.
Note: The use of Washer Rings(①) are OPTIONAL and are especially
useful to help alleviate slight wobbles. Some Legs may need more than
oneWasher Ring whilst some Legs may not need any.
Position arm sofa right side up and test for stability on a Level Surface.
Add or remove Washer Rings(①) where needed to achieve stability.
Step 6
Chair Seat(A)
Right
Arm(E)
Chair Seat(A)
D
D
D
D
Backrest(B)
5 of 8