Installation & Assembly

ManualsBrandsLatitude Run Manuals4 Shelf BookcasesHathcock 22'' H x 63'' W Geometric Bookcase

800330

ITEM:

COASTERFURNITURE.COM

PAGE 2 OF 8

ASSEMBLY INSTRUCTIONS

ASSEMBLY TIME

PARTS IDENTIFICATION

40 MINUTES

ASSEMBLY TIPS:

1. Remove hardware from box and sort by size.

2. Please check to see that all hardware and parts are present prior to start of assembly.

3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.

WARNING!

1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.

2. This product is for home use only and not intended for commercial establishments.

NOTE:

Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.

HARDWARE IDENTIFICATION

NO DESCRIPTION FIGURE Q’TY

1 GLUE 40g

1PC

WOODEN DOWEL

Ø8x30mm

32PCS

CAM BOLT

Ø7x35.5mm

32PCS

NO DESCRIPTION FIGURE Q’TY

CAM LOCK

Ø15x12mm

32PCS

STICKER

Ø 20mm

6PCS

LEFT SIDE

PANEL

2PCS

RIGHT SIDE

PANEL

4PCS

MIDDLE DIVIDER

PANEL

2PCS

D BOTTOM PANEL

2PCS

E SHELF

2PCS

F TOP PANEL

2PCS

Summary of content (7 pages)

PAGE 1
ITEM: 800330 ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. WARNING! 1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishments.
PAGE 2
ITEM: 800330 STEP 1 2 x 32 B x4 A x2 INCORRECT CORRECT 2 C x2 Apply glue on all wooden dowels to ensure integrity of the structure. STEP 2 3 x 32 F x2 D x2 3 E x2 E x2 the reverse side PAGE 3 OF 8 COASTERFURNITURE.
PAGE 3
ITEM: 800330 STEP 3 4 x6 5 4 A 4 B 1 D B 5 Apply glue on all wooden dowels to ensure integrity of the structure. STEP 4 4 x4 5 E 1 B Apply glue on all wooden dowels to ensure integrity of the structure. B 4 PAGE 4 OF 8 COASTERFURNITURE.
PAGE 4
ITEM: 800330 STEP 5 4 x2 5 1 C 4 Apply glue on all wooden dowels to ensure integrity of the structure. E 5 4 STEP 6 4 x4 5 F 1 4 A C PAGE 5 OF 8 Apply glue on all wooden dowels to ensure integrity of the structure. COASTERFURNITURE.
PAGE 5
ITEM: 800330 STEP 7 x2 STEP 8 COMPLETE PAGE 6 OF 8 COASTERFURNITURE.
PAGE 6
ITEM: 800330 m 0m ") 5 5.2 (1 1200mm(4 7.25") 39 552mm(21.73") 218mm(8.58") 326mm(12.83") 422mm(16.61") 498mm (19.6") 280mm(11.02") 552mm(21.73") 498mm(19.6") 552mm(21.73") 218mm(8.58") 280mm(11") 326mm(12.83") 560mm(22") 552mm(21.73") Note : Dimension tolerance ±5% PAGE 7 OF 8 COASTERFURNITURE.
PAGE 7
ANTI-TIPPING INSTALLMENT INSTRUCTIONS FURNITURE TIPPING RESTRAINT WARNING Injury may result from tipping furniture. This restraint may protect against tipping furniture. Do not allow children to climb on furniture. This restraint is not a substitute for proper adult supervision. Failure to detach this restraint before moving the furniture may result in injury and damage. 1. To attach the anti-tip strap, securely mount one end to the top of the case piece with the 5/8” screw. 2.