TDS

Dalton Enterprises, Inc., 131 Willow Street, Cheshire, CT 06410
Phone [phone] • Fax [phone] • www.latexite.com
Revised 01/11/19
TECHNICAL DATA SHEET
Latex•ite® CRACK REPAIR TUBE
Manufacturer Product #: 42376; 42380
UPC #: 0 90932 42376 3; 0 90932 42380 0
Appearance:
Thick Black Liquid
Maximum VOC:
Less than 10 g/L
Application Temperature:
55º F and rising.
Specific Gravity:
1.1-1.3
Viscosity:
4,000-7,000 cps
Weight Per Gallon:
N/A
Color:
Black, dries deep black
Consistency:
Black Mastic Asphalt
Boiling Point:
>212º F
Cure Time (50% relative humidity, 70º F):
24-48 hours.
Freeze ability:
Do not allow to freeze.
Container Size & Weight:
10.1oz tube; 29oz tube
Latex•ite® CRACK REPAIR TUBE is specially formulated using a combination of pure asphalts and gilsonites to ensure
rapid drying and maximum durability.
 Commercial Strength
 Rubberized to prevent freeze/thaw damage
 Fills asphalt cracks and expansion joints up to ½”
 Fills up to 32ft (10.1oz tube) and up to 90ft (29oz tube) with ¼” bead
 Low VOC formula
Using Latex•ite® CRACK REPAIR TUBE is a simple and clean process. Before applying the product, it is important to
thoroughly clean out the crack and remove any loose debris. Use a screwdriver and whisk broom. Rinsing the crack and allowing
it to dry will give you the best results.
Apply only to clean, dry surface. Insert tip into cracks forcing patching material well into openings. Apply to within 1/8"
of surface. Do not use in cracks more than 1/2" wide. Allow to cure prior to sealing. Store in above freezing temperatures.
Apply when surface and air temperature are at least 55 degrees F.
PHYSICAL PROPERTIES & PERFORMANCE
FEATURES
SURFACE PREPARATION
APPLICATION