Installation Guide

Latch R is a proximity reader, keypad, and wireless entry system,

that can be operated as a standalone device or be connected to a

panel as part of a wider system.

Only use screws provided. Other screws can cause Latch R to

disengage from the mounting plate.

The relay will revert to an open state in the event of power failure.

Take precautions when wiring fail-safe locking hardware.

Apply power only after all devices have been properly connected.

Conguration requires the iOS Manager App running on an iPhone

5S or newer.

Troubleshoot at support.latch.com

Things you should know

Welcome to your

smartest install yet.