Installation Guide
Credential Type & Transmission Technology
Credential bit format and length: Passcodes used to unlock the
device consist of 7 digits ranging from 0-9. NFC cards have 37 bit
format and the wiegand output is 26 bit.
Fail-safe/fail-secure operation: Fail-safe/fail-secure can be setup
by conguring the relay as either normally closed or normally open.
Normally open allows fail-safe operation while normally closed allows
fail-secure operation.
Conguration & Commissioning Instructions
Conguration & Commissioning instructions can be found in more
detail in the Technical Certication Training as well as on the support
website at support.latch.com.
Service Information
Service Information can be found in more detail in the Technical
Certication Training as well as on the support website at
support.latch.com.
Model: R2 (FCC ID: 2AK5B-R2 | IC ID: 22134-R2)
•
Applicable Products
This installation guide applies to products with the following
designators on the label: