Manual: ShowNET
Manual: MicroNet Slim - Network Interface
page 7 / 24
Technical overview:
- X/Y scanner output with 12 bit resolution (4096 dierent positions on each axis)
- Up to 6 color output with 8 bit resolution (256 dierent values per
color channels): red, green, blue, intensity, user dened 1, user dened 2
- DMX512 input and output (non-isolated)
- 10/100 Mbit Ethernet port
- Flexible IP address setting: xed address, DHCP or AutoIP
- Micro-SD card slot for ILDA le playback (ILDA format code 5 RGB)
- Built-in laser gures for stand alone operation
- Stand alone operation via DMX control or auto trigger
- maximum scan speed of up to 150kpps
- Up to 16 devices can be used in parallel for multi-projector laser shows
The DIP switches can be used to select the desired operating mode. A change in the operation
mode requires a restart of the device (unplug and replug the power supply). Do not change
and DIP switch settings during operation, random and dangerous laser output can occur.
In the stand-alone modes (DMX controlled, demo mode), the ILDA interface displays pre-
dened laser gures. The internal patterns are used as standard. Inserting a Micro-SD card
with ILDA les to the card slot allows for play back of these les.
5. Operation
5.1 DMX Mode
Dip switch setting
switch 1 2 3 4 5 6 7 8 9 10
Binary DMX
channel oset
1 2 4 8 16 32 64 128 256 has to be on (1) for DMX mode
To get laser output, DMX channel 1 needs to have a value greater than 0 (recommended 64
to 192), and DMX channel 2 also needs to have a value greater than 0.
DMX settings
channel range function
1 0-63 Laser intensity from o to full brightness
(only if lasers support analog modulation)
64-192 Laser full brightness
193-255 Strobe with increasing speed
2 0-255 select the laser frame pattern