Manual: ShowNET
Manual: MicroNet Slim - Network Interface
page 5 / 24
1. Scope of delivery & details
Please check if all listed parts are included and undamaged. Included in delivery:
1 x Network Interface 1 x Power Supply Unit
1 x Manual 1 x micro-SD Card
3. Initial operations, safety instructions
1. Make sure to use correct voltage; see in-
formation in this manual.
2. Installation has to be done by technical
experienced and qualied persons ac-
cording to safety regulations of the res-
pective country.
3. If the network interface has been expo-
sed to great temperature changes, do
not switch it on immediately. Conden-
sation water may damage the network
interface.
4. Never use dimmer, RC or other electroni-
cally switched sockets. Whenever possi-
ble, do not use the network interface to-
gether with large appliances (especially
fog machines) on the same mains!
5. Ensure sucient ventilation and do not
place the network interface on any warm
or heat radiating surface.
2. Preliminary warning notices
1. Please use the network interface only according to these instructions.
2. Do not use the network interface if there are any visible damages.
3. Do not operate the network interface at high humidity, in rain or in
dusty environments.
4. Protect the network interface against dripping or splashing water.