User Manual

Laserworld Showeditor 2015
Version 2015/1.0 2015 Page 97
normally not be visible and displays them at the side where they would have left the
projection area.
“Use Soft Color” activates smooth color transitions between points. The settings made
in Options->Optimize Output->Soft Color Distance (see 8.8.6) are used for the fade
effects. The Color Gradient is calculated and displayed in real time during the
output.
Activated “Optimize Corners” adds additional points at corners to improve the
display of corners. The settings made in Options/Optimize Output/Corner Point
Repetitions (see 8.8.3) apply.
Hint: In case the figure is a wave, it is recommended to uncheck this option.
“Perspektive” scrollbar allows for changing the viewing perspective on the figure.
Multiplication Effect:
To create a multiplication effect to a figure or mirrored figures, “Image Copies” can
be specified: The value for “Copies X-Axis” and the one for “Copies Y-Axis” describe
the number of copies of the figure that are displayed.
On applying values greater than 1, no copies are visible at first, as they overlap the
initial figure. The copies become visible at the time a displacement or a mirroring is
applied.
The Multiplication effect can be compared to the prism effects known from
conventional lighting systems.
At “Size 1%-1000%” it is possible to specify the size of the copies. With “Displacement
X (Y)” the displacement of the copies can be adjusted in X and/or Y-direction. With
“Mirror X(Y) Axis” the figure can be mirrored on the X and/or Y-axis.
The button “Reset” is used to reset all Multiplication Effect settings.
Fig. 87: Effect Window: Multiplication Effect