User Manual

Laserworld Showeditor 2015
Version 2015/1.0 2015 Page 64
Color Selection 6.8.
Laserworld Showeditor offers three different color selection options for drawing
frames ad figures: The Color Circle (Fig. 50), the Color Cube (Fig. 51) and the Color
Palette (Fig. 52).
The setting of the desired color selection mode can be done at Options -> Others.
6.8.1. Color Cube
The Color Cube is the most versatile tool for color selection, as it offers all possible
colors for selection. The scrollbar at the side of the Color Cube allows for switching to
different layers of the third dimension of the cube.
The viewing angle to the color cube can be changed by using the three radio
buttons next to the Color field. Selecting another radio button does not change the
color selection – only the viewing perspective.
6.8.2. Color Circle
The Color Circle is a simplified version of the Color Cube and only offers the most
important colors. With using the scroll bar at the side, the intensity of the colors can
be set. The Color Circle is meant for quick and easy programming, for professional
applications it is recommended to use the Color Cube instead.
6.8.3. Color Palette – favorite colors
Under the Color Cube or the Color Circle 20 colored areas are shown. This is the
quick access palette, and it’s preset with the 20 most intense colors – the one where
Fig. 49: Options->Hardware: Setting of Output Routing
Fi
g
. 51: Color Cube
Fig. 50: Color Circle
Fig. 52: Color Palette