User Manual

Laserworld Showeditor 2015
Version 2015/1.0 2015 Page 48
After having made the appropriate adjustments, click “Close Window”.
When activating the text tool with left mouse click, the new settings have effect: In
the drawing area, click at the starting point of the first letter: The dialog box for
entering the desired text shows up. Please confirm with OK after having typed the
text.
This procedure is good if only single words shall be projected. Longer texts will be cut
at their end. If longer texts should be displayed and text wrap is necessary, please
repeat the above procedure per text line or use the following text creation method.
Long texts, animated  Morphing Text
Long texts and animated texts need to be created directly in the text dialog. The
checkbox “Morphing Text” needs to be checked.
Right click on the A symbol to open the Text Editor.
The text can then be entered into the text box in the left column:
Fig. 33: Figure Editor: Dialog for text options (click with right mouse
button on the text tool)