User Manual

Laserworld Showeditor 2015
Version 2015/1.0 2015 Page 44
Main Manual 5.
The following part of this manual describes the features of Laserworld Showeditor in
detail. Even though most of the features can be explained in this manual, there are
always more possibilities that cannot be shown in the manual properly.
Please feel encouraged to have a look at http://www.showeditor.com to learn more
about Laserworld Showeditor, ask the community or the developers, and share your
experience with others.
Figure Editor (Main Window) 6.
The Main Window of Laserworld Showeditor is the Figure Editor. From there all other
windows can be accessed (see section 4).
The look of the figure editor can be adapted and is dependent on the actual screen
size and resolution. See some example in Fig. 31.
As shown, the main part of this window is the Drawing Area. The left column holds the
tools for drawing like frame tools, working tools for modifying points of the figure,
buttons to select the kind of drawing function (line, circle, etc.) and buttons to save
the created or edited figures. Below the save buttons the grid size of the drawing
area can be specified.
The Menu in the head section of the window holds all the configuration and control
features that are not accessible through buttons or mouse actions. A detailed
explanation of each menu item follows in chapter 6.12.
Fig.
31
:
Figure Editor: Main Window of Laserworld Showeditor
Reset / Assignment
Drawing Area
Menu Bar
Color Selection
(Cube or Circle)
Favorite
Colors
Folder Window
Output Control
Window Selection
Save Figures
Drawing Tools
Frame Tools
Information about Figure
Grid
Figure Table