User Manual

Laserworld Showeditor 2015
Version 2015/1.0 2015 Page 38
3) Assign figures to keys (best is to do it by Drag and Drop into the Live Window)
4) Verify the settings for EACH key and eventually correct them
5) Save the new live show by a click on “Save Live Show”.
The Windows of Laserworld Showeditor 4.
Laserworld Showeditor uses several windows to provide different workspaces for
certain applications.
This multi-window configuration makes it easy to use many features at the same time
with a multi monitor setup. For best programming experience it is recommended to
use a Two- or Three-Monitor setup.
The minimum requirements for screen resolution are 1152 x 768 pixels. However it’s
recommended to use a bigger screen resolution for professional timeline
programming. Live Shows usually don’t require a bigger screen; also a single monitor
is completely sufficient to play a live laser show.
Laserworld Showeditor saves window positions on program exit. If this causes any
problem, e.g. when switching between different monitor setups, this can be reset:
Options -> Reset Settings -> Reset only Window Positions
The Figure Editor 4.1.
The Figure Editor window is the core Showeditor window. There figures are created
and managed. All other windows can be accessed from the Figure Editor window.
Fi
g
. 24: The Fi
g
ure Editor