User Manual

Laserworld Showeditor 2015
Version 2015/1.0 2015 Page 21
Starting the Program 2.7.
To start the program, just click on its icon (small pictures) on your
computer-screen, which the installation has generated on the
desktop automatically. After the start of the program, you should
see the main-window on your screen like shown in the picture
below.
On startup of Showeditor, a window opens that allows for selecting
the operation mode of Showeditor. No matter which option is
chosen, it is possible to seamlessly switch between the modes
directly from the user interface later.
Laserworld Showeditor can also start through a double click on files assigned to
Laserworld Showeditor (*.ini or *.shw). Remember that this only works, if the very file
resides in a folder path that does not have any spaces in it’s name. Please use
underscores instead. Showeditor cannot handle spaces in folder and file names
properly due to technical restrictions.
Initial Settings 2.8.
On first start of Laserworld Showeditor it is suggested to adapt the Settings to the very
needs: Language, hardware, output behaviour and many more features can be
defined there.
Fig. 7: Main window of Laserworld Showeditor. Click on Options for hardware setup
(see red arrow)!