User Manual

Laserworld Showeditor 2015
Version 2015/1.0 2015 Page 150
13.2.1. Use Key Up Event (Flash)
If this option is checked, the selected figure is only displayed as long as the
respective key is pressed. On releasing the key, the figure output switches off. This
usually only works on keyboard control. It does not work on DMX or touchscreen
control.
13.2.2. Switch off unused tracks
If this option is checked, all figures on other tracks than the active are switched off.
13.2.3. Output Tracks 0 - 47
By checking the output track, the very figure is routed there. (see Figure Editor
settings)
Attention! If Showparts are used, the respective main track must be specified. The
configuration of the Showpart handles the rest of the show distribution.
13.2.4. Scrollbars DMX Start / Stop Value(s)
With these two scrollbars the DMX value range for DMX control is set. After having set
the value range, the button “Apply” must be clicked for applying the settings.
13.2.5. Scrollbars MIDI Start / Stop Value(s)
With this scrollbar the MIDI value range for MIDI control is set. After having set the
value range, the button “Apply” must be clicked for applying the settings.
13.2.6. Buttons “Assign all Keys to DMX” and “Map MIDI automatically”
An automated key assignment for DMX / MIDI can be made with a click on the
respective button. This makes sense if many figures are used or just for convenience.
Fig. 141: Key options