User Manual

Laserworld Showeditor 2015
Version 2015/1.0 2015 Page 147
The MIDI Input routing specifies, which MIDI values are used to control which feature.
Every MIDI transmission contains 4 different data types: MIDI channel, MIDI message
No., Data 1 and Data 2. To use a MIDI value for the control of an event (e.g. push a
key) the “parameters” must be matched to the incoming MIDI command in order to
be recognized properly.
12.2.2. Setup of MIDI Input Routing for the Timeline Window
The MIDI configuration of the LIVE and the Timeline Window are done in the same
dialog, but the interface needs to be changed with a click on “Timeline”.
As the Timeline has different requirements in terms of MIDI control, there is an
extended configuration screen for it.
The major button toggles “Routing like record selection” (Fig. 138). This means: If
active, only the green marked track in the Timeline is active for MIDI control.
To program/record a shown over MIDI in this mode: Select a track, click on the
record button and the effect values can be adjusted via pitch bend or modulation,
the figures can be selected by pushing keys.
Fig. 138: Live Window: MIDI Input routing (assignment for timeline)