User Manual

Laserworld Showeditor 2015
Version 2015/1.0 2015 Page 142
11.6.7. Use of several identical DMX-devices with different addresses
To use several identical DMX units it is necessary to create the profile for one device
first. For the other, identical devices it is only necessary to copy the existing profile
and simply change the DMX start address (and probably the name as well).
Then save the profiles for the devices, using different filenames.
It is not always necessary to individually save the newly created profiles: If the button
“Use DMX Device” is clicked after the profile has been created, the profile is inserted
to the device list (without saving). The device list itself can be stored afterwards. It
does not require the single profile files.
11.6.8. Button: Save DMX-Device
Save the profile of one DMX device (the one in active edit mode).
11.6.9. Button: Load DMX-Device
Load a *.ger file either edit it and just include it to the device list.
11.6.10. Button: Use DMX-Device
On click on this button, the device profile is immediately inserted to the device list,
without saving the individual profile. As it is possible to save a complete device list,
this procedure makes the creation of profiles quicker and easier.
Load stored device profiles to the program with this button. A list of
devices can be created this way (see example in Fig. 133).
Fig. 133: DMX, Intelligent DMX, DMX device list, color-select area and XY-joystick
area