User Manual

Laserworld Showeditor 2015
Version 2015/1.0 2015 Page 141
11.6.2. Label
The label allows for giving names to the very channels. This makes it easier to identify
them later.
11.6.3. Dimmable
This column can be set to true or false per channel. It specifies if the very channel
shall be considered a dimmer channel, meaning that this very channel can be
dimmed using intermediate macro steps. If set to “false”, the channels values always
immediately change to their nominal values. This e.g. significantly influences on the
behavior of Gobo-Wheels in Moving-Heads, Light Scanners and similar devices.
11.6.4. Master sensitive
If this option is selected for a
certain channel, this channel
reacts to settings of the master
dimmer. Usually only the
brightness channel(s) is/are
assigned a “true” value(s) here.
Example: If all channels of a
moving head fixture would be
assigned “true” for the Master
Dimmer, the head would also
move to the zero position if the
master fader is put to zero – so
would all colors and gobos do.
11.6.5. Channel
Red/Green/Blue
If channel numbers are entered
per color, an RGB color
selection field becomes
available (Fig. 131). If a non-
RGB device is used, enter “0”.
11.6.6. X and Y Channels
(PAN/TILT)
If values are specified for the X
and Y Channel, a joystick for
head movement control is
available for programming
later. The “Low” values refer to
the 8-bit resolution channel; the
“High” values refer to the 16-bit
resolution channels. For non-
moving devices enter “0”.
Fig. 131: DMX / Intelligent DMX /Edit DMX-Device
Fig. 132: DMX / Intelligent DMX /Edit DMX-Device.
Exam
p
le