User Manual

Laserworld Showeditor 2015
Version 2015/1.0 2015 Page 14
DLL-Files and Error-Messages during Installation 2.4.
In the case any error messages show up during the installation process, please have
a closer look at our troubleshooting hints on
http://www.showeditor.com/troubleshooting
Laser Output Hardware (DAC) 2.5.
Laserworld strongly recommends to only using the ShowNET interfaces with
Laserworld Showeditor. The software is optimized for this DAC, and the licensing is
also handled through it.
The interfaces (DAC) can be selected at Options → Hardware. In the drop down lists
the connected interfaces can be selected. For special applications it is possible to
select the same interface in two lists (matrix-match). This is especially useful, if two
different settings (e.g. output options) will be applied. Output should only be made
to one of the selected lists per interface, as otherwise the signals overlay and may
lead to flickering output.
An example for such an application would be a mixed show with graphics and
beams: For the graphics display, the output is set to fit to a screen, for the beams a
setting with different parameters is chosen.
Another possible application could be the use of a playlist containing a mixture of
different show types (e.g. graphics, 1 projector beam, 3 projector beam, 1+2
projector beam etc.). This kind of use is explained in the chapter “Playlist”.
The different hardware interfaces can be custom named, to make them easier to
identify. (e.g. “Main Projector”, “Satellite 1”, “Graphics Projector”…).