User Manual

Laserworld Showeditor 2015
Version 2015/1.0 2015 Page 134
Vertical Green Arrows 10.6.
The green up / down arrow buttons can be used for arranging the play
order of the shows in the Play List.
The List area 10.7.
The List area shows all shows in the Play List in the arranged order. The shows can be
directly selected. A double click starts the show play of the selected show. After the
play of a show that has been started with direct double click, the output is stopped –
the consecutive shows are not played. Use the Play button to play the Play List shows
in sequence.
Output Routing and Speed 10.8.
The output routing and the corresponding scan speed settings allow for individual
hardware output routing of the very show signal. (Also see Chapter 2.6)
If the output routing has been changed for the Play List, do NOT save the options, as
it will lead to signal routing problems.
MIDI-Info 10.9.
A click on this button displays information on the actual status for the remote
control of the Play List over MIDI signal.
Loop 10.10.
If activated, the playing of the show list repeats from the beginning if has played the
last show of the sequence. This runs infinitely until the playback is stopped manually.
All Shows 10.11.
If “All Shows” is checked, the playlist plays every show consecutively in their order in
the Play List. This option does not apply for shows that have been started by double
click.
Wait for OK-click before start next show 10.12.
If this option is checked, the start of the playback of the next show must be
confirmed. This feature is especially suitable if there shall be explanations between
shows and the start of the following show cannot be scheduled.
New List 10.13.
Clears the content of the active list and a new one is started.