User Manual

Laserworld Showeditor 2015
Version 2015/1.0 2015 Page 127
The dongle numbers entered in the left area of the dialog box are used for both
ways. This is how the permission settings work:
 Only the “Dongle-No. enabled to give rights” can change the rights.
 If all numbers are set to 0, no rights are set – the show is open for everybody’s
use. No protection is applied!
 It is only possible to change the permission settings, if the actually inserted
license equals the Dongle-No. enabled to give rights. Otherwise no changes
to permissions are possible.
 Protection spans all figure-files and all show-files.
 Before setting any protection it is strongly recommended to make a copy of
the show(s)!
9.2.10. List of Show Names and Play Lists (loaded at the last sessions)
The 10 last loaded show or play lists are displayed at the bottom of the menu File for
quick access. A click on the name of a show or Play List directly opens it.
Menu: Showpart 9.3.
This menu has already been explained above (See Chapter 9.2.5)
Menu: Edit 9.4.
This menu offers some additional features for editing
a show.
9.4.1. Reset
This menu item reloads all figures and events.
9.4.2. Undo
This menu item has the same function as the button
UNDO. (See Chapter 9.1.7)
9.4.3. Output selected events
This feature activates direct output to the connected projector(s) for active/selected
events, if the laser output is set to “On”.
9.4.4. Cut/Copy/Paste
This menu item has the same function as the respective buttons. (See Chapter 9.1.6)
Fig. 110: Timeline Editor:
Menu Edit