User Manual

Laserworld Showeditor 2015
Version 2015/1.0 2015 Page 123
9.1.9.3. Effect Intensity Input
To record effects on the timeline, select the
desired effects subtrack first. After hitting the
record button it is possible to draw the effect
intensity in the area on the very left of the
Timeline Editor – see Fig. 107. It is possible to use
the right mouse button to record the effect
intensity as well: With this method, the effect
levels are aligned to the horizontal grid.
9.1.9.4. Display of the Waveform
If the sound file is in the *.wav file format, the
waveform of the sound file is displayed in the
timeline bar. In case of wrong waveform
recognition double click on the timeline bar to
re-initialize the waveform display.
Menu: File 9.2.
9.2.1. Open Show
This menu item is used for opening an existing show.
Select the appropriate show and click Open. Additional
possibilities to load shows either is the use of the playlist or
a double click on the show file (extension *.shw) in the
Windows Explorer.
9.2.2. Save Show
This menu item is used for saving the active show.
9.2.3. Save as
This menu item is used for saving the active show with a
new name. It is possible to use the same show folder for
different shows, if they all only use figures that reside in this very folder. It is possible
that these different shows in one folder use different music files too.
9.2.4. Create New Show
Clicking on this menu item opens the dialog for creating a new timeline laser show:
The sound file for the new show must be selected first. It is recommended to create a
new show folder that should hold the music file, prior to this step. File types *.mp3
and *.wav are supported.). All show files and figures must be stored in the same
folder to be accessible for show programming.
Fig. 108: Timeline Editor:
Menu File
Fig. 107: Timeline Editor, live record
effects intensity