User Manual

Laserworld Showeditor 2015
Version 2015/1.0 2015 Page 107
These parameters apply to any output optimization changes:
 The optimization of the laser output is in real-time, meaning the changes are
directly put out to the laser system (if connected) and can be seen live..
 Each hardware output channel must be optimized individually.
 Color correction options may also be affected by optimization measures.
These can be found in the tab “Color Correction”
A tutorial on how to configure scanners to optimal output performance can be
found on: http://www.showeditor.com/tune-scanners
Information: The test pictures (with file extension *.bin) are nearly NOT optimized. The
pictures from the folder “HE-s_Testbilder” are optimized, as they are “normal”
Showeditor figures.
Remember that Laserworld (Switzerland) AG is not responsible, nor liable for the
correct control of the laser projector. Please refer to the disclaimer for further details.
8.8.1. Extra Color Point at Line Start
This specifies the number of additional points that are added at the beginning of a
line on a color change (NEW color). It applies to the transition blankedLaser On
setting, as well as on a change between colors.
8.8.2. Extra Color Point at Line End
This specifies the number of additional points that are added at the end of a line,
before another line piece / object is drawn with a different color. It applies to the
transition blankedLaser On setting, as well as on a change between colors.
8.8.3. Corner Point Repetition
This setting specifies how often a point is repeated, if its property is defined as corner
point. More repetitions will result in sharper, but also brighter edges. Corner points are
usually defined automatically on the creation of figures.
Fig. 94: Options Window, Tab “Optimize Output”