User Manual

Laserworld Showeditor 2015

Version 2015/1.0 2015 Page 102

8.5.1. Print Width (or Height) for 1 octave

The width and height per octave for the printout of the key assignments for the MIDI-

keyboard can be specified here. As standard, 5 octaves are printed per page,

together with small thumbnails of the figures. The values can be changed to make

the printout fit keyboards with smaller keys as well.

8.5.2. Selected MIDI-Port

The MIDI-device that shall be used can be specified with the button “Change”. See

details on the configuration of the MIDI device in chapter 12.2.

8.5.3. Setup MIDI input routing

Please see a detailed description of the MIDI setup in chapter 12.2.

8.5.4. DMX-Channels

This option specifies the maximum number of DMX-input and -output channels in use.

Reducing the number of channels can improve the performance of the software;

however most of the modern computers should be able to handle all channels

without any performance issues at all. Maximum are 512 channels.

8.5.5. DMX-Ports (Input and Output)

“DMX-Ports” provides configuration options for the input and output DMX devices.

It is possible to use different hardware for input and output. The incoming DMX values

can also be routed to either the Timeline window, the Live window or set to

automatic select, depending on opened windows (if opened, routing goes to the

Live window, if it’s closed the routing goes to the Timeline).

8.5.6. DMX through

DMX trough allows for daisy-chaining DMX signals through the software. This means

that one DMX interface receives a DMX signal and the other interface re-outputs it.

. 91: O

tions Window

Tab “Midi

DMX”