User manual

Manual: Laserworld Proline Series
page 10 / 36
Channel Value Function
10 - zoom 0 - 10 no zoom
11 - 87 manual zoom
88 - 150 automatic zoom in with increasing speed
151 - 200 automatic zoom out with increasing speed
201 - 255 automatic zoom in and out (in turns)
11 - X rotation 0 - 128 manual positioning
129 - 255 automatic movement
12 - Y rotation 0 - 128 manual positioning
129 - 255 automatic movement
13 - Z rotation 0 - 128 manual positioning
129 - 192 anticlockwise movement with increasing speed
193 - 255 clockwise movement with increasing speed
14 - drawing 0 - 74 manual drawing
75 - 104 automatic drawing with increasing speed
105 - 144 automatic reduction with increasing speed
145 - 184 automatic drawing and reduction with increa-
sing speed
185 - 255 automatic two-sided reduction
15 - Y wave 0 - 10 no eect
11 - 69 small wave eect with increasing speed
70 - 129 medium wave eect with increasing speed
130 - 189 large wave eect with increasing speed
190 - 255 wave eect II
15 - X wave 0 - 10 no eect
11 - 69 small wave eect with increasing speed
70 - 129 medium wave eect with increasing speed
130 - 189 large wave eect with increasing speed
190 - 255 wave eect II
Attention! The following channel only work if the laser is in static DMX mode (Channel 1 at value 150 - 199)!
2 - pattern selection 0 - 255 pattern selection
Please note that not each pattern can be combined with each eect.
To use the grating eects in ILDA mode, additional DMX control is necessary.