User Manual
Manual: Club Series MKII
page 10 / 12 EN
an address that doesn’t overlap with this range.
Channel Value Function
1 0 - 255 Mode selection
2 0 - 255 Pattern selection
3 0 - 255 Circular Movement
4 0 - 255 Y Rotation
5 0 - 255 X Rotation
6 0 - 255 Horizontal movement
7 0 - 255 Vertical movement
8 0 - 255 Manual Zoom
9 0 - 255 Pattern Buildup
10 0 - 255 Dot Eect with Strobe
11 0 - 255 Color Seletion
Please note that not each pattern can be combined with each eect!
The DMX mode only works when a DMX controller is connected to the
laser.
Use the switches 1 - 9 to set the DMX address of the laser. Each switch
represents a number. To dene a number use the preceding number
and multiply it by 2:
The laser uses 11 DMX channels, so make sure that the next device uses
Switch 1 2 3 4 5 6 7 8 9 10
Number 1 2 4 8 16 32 64 128 256 Mode Switch