User manual

Manual: Laserworld Garden Star Series
GARDEN STAR PRO White Star I GS-400RGB-W
English
OPERATING THE LASER PROJECTOR
Once the laser light eect is turned on, it will enter the default mode with the laser on and the auto-
matic timer in 6 hours on and 18 hours o mode. Use the included remote control to change these
settings.
OPERATING THE TIMER
This laser light eect has a built-in timer that is designed to automatically shut o after 6 hours of
operation. It will go into sleep mode for 18 hours and resume its operation thereafter. The timer will
turn on once the light is plugged in. The timer can be changed to 4 hours on/20 hours o and 8 hours
on/16 hours o.
OPERATING THE REMOTE CONTROL
Use the included infrared remote control to operate the laser light eect features. Infrared signal does
not go through solid objects, such as windows, walls, trees, shrubs, etc. Make sure there is a clear line of
sight between you and the xture. Point the remote control at the FACE of the laser light eect xture,
where the receiver is located. The remote operates up to 20‘ (6.1 m) of unobstructed distance away
from the face of the xture.
20´ (6,1)
ON/OFF: Turns the device on & o. When turning the laser light eect o, the device will save all current
settings so that the device will resume with the latest mode when turning it on again.
COLOR: Push the color button and seven dierent colors cycle through (Green, Red, Blue, Yellow, Pink,
White, Thiel) Available modes: STATlC MOTION, CHASING, PULSE, FADE, FLASH.
BRIGHTNESS+: lncreases the brightness of the laser light. Pushing the button persuades the maximum
brightness. Available modes: STATIC MOTION, CHASING, PULSE, FADE.
6. Remote controller operation