User manual
Manual: Evolution Series ES-800S RGB 3D
page 8 / 18
Connect a DMX controller to operate the laser.
Use the switches 1 - 9 to set the DMX address of the laser. Each switch represents a num-
ber. To dene a number use the preceding number and multiply it by 2:
This laser uses 5 DMX channels, so make sure that the next device uses an address that
doesn’t overlap with this range.
Channel Value Function
1 0 - 69 Laser o
70 - 136 Sound mode
137 - 205 Automatic mode
206 - 255 DMX mode
2 & 3 together 0 - 28 no eect
29 - 255 rotation with increasing speed
Pattern selection
4 0 - 255 pattern selection
Strobe
5 0 - 20 no eect
21 - 255 strobe with increasing speed
Please note that not each pattern can be combined with each eect.
7. To turn o the device, press the power switch („OFF“), turn o the key switch and dis-
connect the power cable from the mains.
Switch 1 2 3 4 5 6 7 8 9 10
Number 1 2 4 8 16 32 64 128 256 Mode Switch