User manual

Manual: Ecoline Series EL-500RGB KeyTEX
page 7 / 33
7. Operation
7.1 Power supply
Connect your EL-500RGB KeyTEX with the external PSU and connect it to the mains. Please
make sure that you are using the correct voltage. False voltages could destroy the device. Ple-
ase use the voltage specied at the end of this manual. Don‘t focus the front of the laser on
people while installation.
7.2 Switch on / o
Insert the key into the key switch on the back side of the laser and switch to “On“ to switch
the device on or to “O“ to switch the device o. Please disconnect the device from the power
supply if you don‘t need it for a longer period.
7.3 Modes
Access the four dierent operating modes available in this product by using the MODE button
on the front panel. Pressing and holding the MODE button for 2.5 seconds will turn the pro-
duct on or o. Press MODE to cycle through the modes. Please see a description of each mode
below.
Mode Description
Auto Built-in auto programs
Scene Pattern selection
Music Music mode
Clock Clock mode
Text Text mode
DMX DMX mode
7.4 IR remote controller
Cycles through auto pro-
grams
Sound-active mode
Pattern selection
ON / OFF button
Mirror eect
Pauses the eect
Clock mode
Text mode
Numeric keys