User manual
6. Device connections & setting options
connection for
power supply
laser outlet
window
micro
IR receiver for remote
control
On / o switch
& modes
Laser radiation!
Avoid exposure
to beam.
Laser class 3b
Caution of radi-
ation if cover is
removed
Warranty label
7. Operation
7.1 Power supply
Connect your EL-Micro with the line adapter and connect it with the power supply.
Please make sure that you are using the correct voltage. False voltages could destroy
the device. Please use the voltage specied at the end of this manual. Don‘t focus
the front of the laser on people while installation.
The following functions can be set:
7.2 Switch on / o
Set the switch on the back side of the laser on “1 On“ to switch the device on or
“4 O“ to switch the device o. The auto mode is active when “1 On“ is set. Please
disconnect the device from the power supply if you don‘t need it for a longer period.
7.3 Stroboash
Set the switch on “2 Stroboash“ to activate the ash eect. The laser output will be
interrupted in certain intervals.
7.4 Voice Controller
The music mode is active when “3 Voice Controller“ is activated.
7.5 Remote control
The EL-100RG Micro IR can be controlled via a remote control unit. All settings can be
done by this. Please compare the operation steps 7.2 - 7.4 to make the settings with
the remote control unit.
on / o button
speed settings
color settings
mode selection
strobe eect