User manual
Manual: Club Series CS-500RGB KeyTEX
page 5 / 10
4. IR remote controller
Button Function / Button Description
On/O button Turns laser on/o
Auto mode
Laser runs in auto mode. Red LED indicator lights. Press the number
buttons to get dierent design patterns
Sound mode
Sound-active mode. Blue LED indicator ashes when sound is de-
tected. Sound-active mode displays the same design packs as auto
mode, but responds to sounds. Press and hold to enable sound
sensitivity adjustment. Use 1 (least sensitive) to 9 (most sensitive)
Pause Pauses the program. Press again to continue the program
Pattern selection
Press button to enter the pattern selection and select one of the
available patterns by pressing the number buttons.
Text mode
Press to enter the text mode, then press any numbered button.
Enter text using the keyboard. Red and blue LED indicator lights.
Clock mode
Press numbers on the number pad to set the time and press ‚SPACE‘
to start the clock function
Numbers Press to select a number
Prev/Next Press to go to a previous / next step
Mirror Eect
Press and hold to mirror the laser projection. Press repeatedly for up
to 4 mirrored options
5. Using the keyboard
Use the keyboard to access menu options, select laser patterns, and enter dierent mo-
des. To use the keyboad with the laser, do the following:
1. Connect the USB cable of the keyboard to the USB interface on the back of the laser
projector.
2. Connect the laser to the mains.
Menu Options
To select the menu options using the keyboard, do the following:
1. Press
to access the menu options. The laser output displays the current menu option.
2. Use
to scroll through the menu options: 1. AUTO, 2. SCENE, 3. MUSIC, 4. CLOCK, 5.
TEXT and 6. DMX.
3. Press
to conrm the selection.