User manual

Manual: Club Series CS-500RGB KeyTEX
page 8 / 10
English
Channel Value Function
1 - modes 0 - 49 laser o
50 - 149 automatic mode
150 - 199 sound mode
200 - 249 text mode
250 - 255 static DMX mode (patterns)
Attention! The following channel only works if text mode in Channel 1 is active (value 200 - 249)!
2 - text mode 0 - 19 zoom in / out
20 - 39 static text
40 - 59 wave
60 - 79 text drawing
80 - 99 zoom out
100 - 119 x-axis movement
120 - 139 y-axis movement
140 - 159 y-axis rotation
160 - 179 x-axis rotation
180 - 255 z-axis rotation
Attention! The following channels only work if static DMX mode in Channel 1 is active (value 250 - 255)!
2 & 3 - pattern selection 0 - 255 patterns selection
4 0 - 209 colors selection
210 - 255 pattern ashes with speed selection
5 0 - 255 pattern drawing with speed selection
6 0 - 255 zoom in with speed selection
7 0 - 255 y-axis rotation with manual speed selection
8 0 - 255 x-axis rotation with manual speed selection
9 0 - 255 z-axis rotation with manual speed selection
10 0 - 255 x-axis movement with manual speed selection
11 0 - 255 y-axis movement with manual speed selection
12 0 - 255 stretch eect
Please note that not each pattern can be combined with each eect!
Mode DMX
Press
to select the mode and press ‚ENTER‘ to activate the mode.
Enter the DMX address with the digit keys (e.g. press ‚0‘ ‚0‘ ‚3‘ and ‚Enter‘ for setting 003). Use
the Windows Button to choose DMX mode again. You now can see your DMX address. If it‘s the
wrong address, just press any digit button (e.g. ‚4‘ 4‘) and you can set the right address.
When DMX mode is active, use following DMX chart for controlling via external DMX signal: