Instruction Manual

LaserPeck Engraving Machine
Instruction Manual
Warning
Cautions
Pleasereadtheusesafetyguidecarefullyandkeepallthe
contentsinmindforastandardoperation.
Thisproductdoesnotcontainanyreplaceablecomponents.
DonotdisassembleLaserPeckeryourselfforanyscenario.
WhileLaserPeckerisworking,alaserbeammaybeemitted,
whichmaycauseskinburns.Inparticular,itcancauseserious
damagetotheeyesofhumansoranimals(pets).Thedamage
toscreensofdevicessuchasphonesandpadsisalsovery
serious.Properuseandmaintenanceoftheproductisextremely
importantforthesafeoperationofthisproduct.Fortheoperation
andmaintenanceofthisproduct,pleasestrictlyfollowthe
instructionsinthismanual.
WhenoperatingwithLaserPecker,besuretoweargoggles
atalltimes.
Use Safety Guide
TheStandardVersion
Accessories(Tobepurchasedseparately)
Disclaimer
Product And Accessories List
You(includingyourauthorizedperson)agreetoexempt
LaserPeckeranditssubstantiveowners,directors,employees,
agents,distributors,retailers,contractors,oraffiliatedenterprises
fromanyliability,loss,compensation(includingbutnotlimitedto
productliability,faultliability,liabilityforbreachofcontract,etc.)
orliquidateddamagesarisingfromusingLaserPeckerinthe
presentorfuture.
Goggles
TheHost
TheCharger
UltrasonicDetector
SafetyShield
Instructions Before Use
Technical support
Copyright
Warranty – Considerations
Contact:
EyeProtection
EachLaserpeckerisequippedwithsafety
goggles,itissafertowearitwhenoperating.
PasswordLock
Whenusingthedeviceforthefirsttime,you
needtoenterthesecuritycodetostartthework.
UltrasonicDetector
Intheprocessofengraving,theLaserpeckerwill
suspendoperationimmediatelywhenanobject
enterstheengravingrangetoensureusersafety.
SafetyShield
Withairpurificationmodule,purifythesmoke
fromengraving.Byweakeningthelightsource,
theworkstatecanbeobservedwithnakedeyes.
Product Introduction
TheHost
SafetyShield
1.Type-CInterface
2.BluetoothConnectionIndicator
3.PowerSwitch
4.TripodMountingHole
5.LaserWindow
APP Download Path
Operation Diagram
YoucandownloadtheAPPinasuitablewaybyusingthe
followingGRcode.
Youcansearch“LaserPecker”inappleAPPstore,google
playstoreandotherappmarketstogettheAPP.
Prepareanadapterwithatype-cinterfaceabove5V/2A.Itis
recommendedtousethepoweradapterthatcomeswiththis
productoracharger,powerbank,otherformsofpowersupply
certifiedaboveQC2.0,asshowninthefollowingdiagram.
Press the button to pause or continue the engraving.
Thecopyrightofthismanualbelongstothesoftwareand
hardwareinvolvedinthisproduct,andallrightsbelongto
ShenzhenHingintechnologyCo.,LTD.(hereinafterreferred
toas[Hingintechnology]).
LaserPeckerisaregisteredtrademarkofHingintechnology.
Informationinthismanualissubjecttochangewithoutnotice.
Andtheinformationinthismanualdoesnotconstitutea
commitmentbythecompany.Pleasevisitourwebsite
(https://www.laserpecker.net)forthemosttimelyupdates.
Exceptfortheuseofthebuyeroftheproduct,withoutthe
writtenpermissionofthecompany,thecontentsofthis
Manualarenotallowedtorewriteorforwardinanyformor
foranypurpose.
Thisproductwesupporttheglobalonlinetechnicalsupport
services,ifyouencounteranyproblemsintheuseofthe
process,
pleaseEmailto[e-mail]andwewillreplyto
youassoonaspossible.
Customerservicetime:9:30-19:30fromMondaytoFriday.
Email：[e-mail]
Manufacturer:ShenzhenHinginTechnologyCo.,LTD
Telephone:+860755-28913864
Install the host on the safety shield, then connect the
power supply as shown in the figure below.
Withoutthesafetyshield,thetripodshouldbeinstalledatthe
screwholeofthehostmachine,andadjusttheheightofthe
tripodtorightposition(200(+/-5)mmisrecommended),and
themirrorsurfaceofLaserPeckershallbeparalleltothecarved
plane,asshowninthefollowingdiagram.
Note:afterdownloadingandinstallingtheAPP,pleaseread
thewarningsandprecautionsintheAPPcarefullytoensure
normaluseoftheproduct.
MotionDetection
EquippedwithsensitiveG-senser,theLaserpecker
willsuspendoperationimmediatelywhen
accidentalmovementduringoperationisdetected.
OverheatingSuspended
TheLaserpeckerwillsuspendoperationifthe
detectedinternaltemperatureisclosetothe
destructivethreshold.
6.HostLocation
7.USBInterface
(PowerOutputInterface)
8.FanExhaust
9.Type-CInterface
(ExternalPowerInterface)
10.SwitchButton
UltrasonicDetector
11.UltrasonicOutlet
12.Type-CInterface
(ExternalPowerInterface)
13.FixedHole
14.USBPowerLine
(PowerSupplyToTheHost)
200mm
100mm
TheTripod
Type-CCable
1
2
3
4
5
6
7
8
9
10
11
12
13
14
PowerOn
InstallTripod
Install safety shield (additional purchase required)
Install the tripod after aligning the installation holes of the
host and the ultrasonic detector, as shown in the diagram
below. After the ultrasonic detector is connected to the
external power supply, the short line will be connected to
the host and ultrasonic detector. Ranging parameters
detected by ultrasonic detector can be viewed in the laser
adjustment page of APP.
Install the ultrasonic detector (additional purchase is required).
Whenconnectedtothepowersupply,theindicatorlightstarts
flashing,indicatingthatthedeviceisinbluetoothpairingstate.
Clickconnectbluetoothontheapp,andtheindicatorlightwill
stayonaftersuccessfulpairing.
BluetoothConnection
Weight
Appearance
Color
DocumentTransmission
APPConnectionMode
APPOperatingSystem
ThePowerInput
OperatingTemperature
OperatingHumidity
Patentapplication7patents
Size
Ifyouuseitforthefirsttime,apromptwillpopupaskingyouto
registerfirst.Orclickthemenuiconintheupperrightcorner→
accounttoregisterormodifytheuseraccountsecuritycode.
Note:thesafetycodeis6digits,whichshallbeinputbefore
printingpreviewandengraving.Pleasekeepitproperly.
Ifyouarenotusingaprotectivecover,pleasefirstopenthefree
modeconsentdisclaimer,otherwisecannotcarryonengraving.
SpecificAPPoperationstepscanbereferredto[APPusermanual].
Afteruse,pleasepressthepowerswitchuntiltheindicatorisoff,
andthenpullouttheUSBcableandpowersupply.
TheLaserSource
Bluelaser,atleast10000hours
servicelife
LaserSource
OutputPower
65*61*53mm
190g

Bluelaser,poweroutput
rangecanbesetat5%-100%

Anodizedofaluminiumalloy
Red,Black,Gold,Green
Bluetooth4.0
G-CodeandJPG
SupportDocument
Format
Bluetoothconnection
SupportIOS9.0+/Android5.0+
type-c(5V，2A)
Range
0℃~65℃
5°C~80°C(Non-condensation)
Range
SafetyCertification
IEC60825-1(Laserlevel1safety
CE,RoHS,FCC,FDACDRHregistration,
IEC60825-1(laserlevel4)
specification)
Wearappropriateclothingandsafetyequipment(e.g.goggles,
semi-transparentbaffles,skinprotectiveclothing,etc.)before
operatingtheLaserPecker
Bealertwhenthelaserisemitted.
RemovethepowercordbeforemovingtheLaserPecker.
ToavoidpossibledamagecausedbyLaserPeckerfalling,please
ensurethatboththeproductandthecarvedobjectareplaced
firmlybeforeuse
Makesurethataprotectivelayerwithhighmeltingpoint(metal,
ceramics,etc.)isplacedbehindthecarvedobjectinorderto
preventunnecessarylosscausedbyburningthroughthecarved
objectduetoexcessivelaserintensityduringuse.
Avoidchildren,minors,petsandmovingobjectsthatmaytouch
LaserPeckertoapproachortouchthisproduct.
Ensurethattheengravedmaterialyouareusingdoesnotrelease
toxicsubstancesduringcarving.
Donotplacetheproductinhightemperatureorhumidity
environment.
Donotplaceflammableorexplosivematerialsaroundthisproduct.
Keeptheenvironmentventilated,becausetheproductwillproduce
smokeorpungentsmellduringcarving.
Ensurethatallpartsofthemachineappearanceareintact,andthe
tripodconnectionpartandtheinterfaceofallpartsofthehost
machineareconnectedproperlybeforestartingup.Incaseofany
defect,pleasestopusingimmediately.
Besuretosupplypowerinstrictaccordancewiththevoltageand
currentspecificationsonthelabel.
Pleasereadthisdocumentcarefullybeforeusingtheproductto
understandyourlegalrights,responsibilitiesandSafetyinstructions.
Thereisaverydangerouslasersourcecomponentintheshellof
thisproduct.WhenthelasersourceofLaserPeckeristurnedon
andabeamisemitted,youmustavoiddirectexposuretothelaser
beam.
Whenusingthisproduct,ifthegroundingwireofthepowersupply
(suchastheterminalboard)doesnotworkeffectively,itshallnotbe
pluggedintothepowersupply,otherwiseaverydangerouselectric
shockaccidentwilloccur.Whenthepowersupplyoftheproductis
notconnectedtothesafetygroundwire,itmayalsocauseuncertain
impactonthelasersystem;Therefore,makesurethepowersupply
includesasecuregroundwire.
LaserPeckerisdesignedforuseinaspecificplace.Youmustwarn
andexplainthedangerofoperatingtheproducttoanyonewhohas
accesstotheplacewithyourauthorization,andatanytimeprevent
anypersonwithoutyourauthorizationfromapproachingortouching
LaserPeckerwithoutpropersafetyequipment.LaserPeckershallbe
keptwithintheoperatingareaunderyourcontrolatalltimesand
mustbeaccessedorusedbyspecialtools,keys(securitycodes),
locksorothersimilarsecuritycontrolmethods.
ThisproductmeetstherequirementsofclassIVlaserproducts.
Pleaseoperateaccordingtothespecifications,otherwise,itwill
causedamagetoskinoreyes.Intheactualworkingstateof
LaserPecker,forsafety,itisstillnecessarytobevigilantandavoid
lookingdirectlyatthelaser.
1.Metal,stone,ceramic,glass,andotherhardmaterialscannot
becarveddirectly.Ceramicandglassmaterialsonlycouldbe
carvedwhenaddingaheattransferlayeronthesurface.
2.TheLaserpeckeruseabluelasersourcewithawavelength
of450nm.Basedonthephysicalcharacteristicsofbluelaser,
reflective,transmittance,whiteandbluesurfacesaredifficult
toengraveduetolowabsorptionrate.
Exceptfortheuseofthebuyeroftheproduct,withoutthe
writtenpermissionofthecompany,thecontentsofthis
Manualarenotallowedtorewriteorforwardinanyformor
foranypurpose.
Engraving material limitation
Totheextentpermittedbylaw,thiswarrantyisexclusiveand
supersedesallotherwarrantiesexpressorimpliedorstatutory.I
naddition,Hingintechnologywillnotberesponsibleforany
accidental,special,indirectorderivativedamage(whichmay
originatefromuse,misuse,non-useorproductdefects).
Whenconsumersapplyforwarrantyservices,theyareobliged
tobackupallimportantpersonaldatainadvance.Duringthe
maintenanceprocess,suchasreplacementofpartsorupdate
ofproductsoftwareversion,datawilldisappearduringthe
maintenanceprocess.Hingintechnologywillnotprovidedata
backuporintegrityofrelevantdataandsetvalue.
Productsenjoyfreeshippingfreemaintenancewarrantyservice
onlywithin15daysoftheshipmentdate,15daysafterthe
shipmentdatetothewarrantyperiod,thecourierfeeneedtobe
paid.
Anyreplacementorrepairoftheproductwillretaintheremaining
warrantyperiodoftheoriginalproductorthe30dayswarranty
afterreplacement.
Forproductssoldinnon-Chinamainlandregions,whenthe
consumerapplyforwarrantyservice,duetolocallawsand
regulations,safetystandards,customsandmaintenance
technologyandpartsinventory,somesoldproductsinsome
countriesandregionscannotsendbacktoHingintechnology
forwarrantyservice,theHingintechnologycanonlyprovidelimited
warrantyservice.Therefore,consumersnotinChinamainland,
regardlessofwhethertheyarewithinthescopeofwarranty,need
tofirstseekwarrantyservicesfromthepathauthorizedbythe
originalcountryofpurchase.Inspectionandmanualhandlingfees
willbecharged.Iftherecipient’scountryhasadditionaltariffs
duringdelivery,itwillbebornebytheconsumer.Consumersapply
forwarrantyservicedirectlytoHingintechnology,willbehandledin
asimilarmanner.
DistributormaysellHingintechnologyproductstocustomers
outsideChinamainland,andifanyvalue-addedservicesare
providedthataredifferentfromthiswarranty,suchservices
areonlyvalidfortheareasoldbydistributorandhavenothingto
dowiththiswarrantyservice.
Engravingqualityishighlycorrelatedwithuseroperation,
processingmaterialandprocessingenvironmentIt'snotunder
warranty.
©2019ShenzhenHinginTechnologyCo.,LTD.Allrightsreserved
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.