Instruction Manual

18
A.
D.
B.
E.
C.
F.
40.8
60 37
40.8
60 37
40.8
60 37
40.8
60 37
40.8
60 37
40.8
60 37
13
Data transfer
Data saved on the micro-SD card can be transferred to PC either
with a suitable card reader or via the mini-USB port. Please refer
to the manual supplied with your card reader for information
about connecting your card adapter or card reader to a PC.
12
Image modes
There are 6 image modes to choose from.
A. IR image (Thermal image)
B. - E. Digital image with IR image overlay (MIX), 4 stages
F. Digital image (black/white)
EN
Calibration
The measuring device must be calibrated and tested on
a regular basis to ensure it is accurate and working properly.
We recommend carrying out calibration once a year. Contact
your distributor or the UMAREX-LASERLINER service department.
Information on maintenance and care
Clean all components with a damp cloth and do not use
cleaning agents, scouring agents and solvents. Remove the
battery(ies) before storing for longer periods. Store the device
in a clean and dry place.