Instruction Manual

14
4
5
37.6
39 25
Iron
Colour ranges IR image
Main menu
General and measurement-specic settings can be made in
the main menu. The menu is controlled with the four buttons
(3, 4, 5, 8).
Green scale
EN
Rainbow
You can choose from several standard colour ranges to represent
the measured infrared temperatures. Depending on the colour
palette, the measured temperatures are adjusted within the cur-
rent image section and displayed in the respective colour space.
The level of infrared emissions given off by everything depends
on the specic material and surface. This factor is determined by
the emissivity coefcient (0.10 ... 1.0). For accurate measure-
ments, it is absolutely essential that the emissivity coefcient is
set rst. The emissivity coefcient can either be custom set or
selected from the predened emissivity coefcients from the list.
6
Emissivity coefcient