Brochure

63
Laser
532 nm
lock
IP 54 IP 66
Laser
635 nm
Additional technical information available at: Phone +49 2932-638-300 · Fax +49 2932-638-333 · www.laserliner.com
Rotary lasers have become an indispensable tool interior finishing work and building construction. Their primary use is to
autonomously radiate 360° beam circles. Laserliner‘s modern rotary lasers are able to perform many additional diverse tasks.
Their reliability and accuracy have proved themselves in practical applications, even in very unusual situations.
Powerful technology
Electronic vials and positioning motors
controlled by temperaturestable sensors
for automatic alignment of devices. The
devices are set to their initial position and
align themselves automatically.
Automatic alignment of the device with a
magnetically dampened pendulum system.
The devices are set to their initial position
and align themselves automatically in a
matter of seconds.
Protection against dust and water – The
measuring tools are characterised by
specific protection against dustand rain.
Transport LOCK: Units with “Automatic
Level” are protected with a pendelum lock
during transport. A special motor lock
protects units with “Sensor Automatic”.
Green looks 12 times brighter than red. This
makes possible applications on dark surfaces,
over long distances and working even in very
bright ambient light conditions. A red laser
with a wavelength of 635 nm is used as
reference for the difference in brightness.
Additional function for all units with
„Sensor Automatic“: The electronic
permanently levels the units even if
these are moving. For quick levelling,
on vibrating surfaces and windy weather.
INTERIOR FINISHING AND BUILDING CONSTRUCTION
Prevents erroneous or inaccurate
measurements: Continuous monitoring
of the alignment of the laser is activated
30 or 45 seconds after automatic levelling.
Measurements will be suspended as a
precaution if the device is disturbed un-
intentionally or moves due to the influence
of external factors.
Rotary lasers with 635 nm technology
have a large temperature range in which
they operate reliably. Visibility is limited
to indoor area applications.
GP_10+11_01_2011_62-78.indd 63 17.01.2011 16:44:52 Uhr