Brochure

27
083.070A 4 021563 671212 2
IQ
083.070.1 4 021563 677153 1
CAT III
300V
9 V
Additional technical information available at: Phone [phone] · Fax [phone] · www.laserliner.com
NEW
Cable detectors
ORDER NO. EAN-CODE PU
CableTracer Pro
Universal, ƃexible cable tracer set including
transmitter and receiver
– Non-contact tracing of the transmission signal
by the receiver.
– Locates electrical cables, fuses, circuit breakers,
metal pipes (such as heating pipes) and much more.
– Locates interrupted cables in existing installations
and short-circuits in existing installation cables.
– May be used with or without mains voltage.
– High frequency of 125 kHz
– Display of DC and AC voltages.
– Signal coding allows as many as 7 senders to
be used with one receiver and is thus ideal for
complex installation settings.
– Integrated AC voltage detector
– Permanent AC voltage warnings
– Integrated illumination of measuring points
– Clearly arranged, illuminated displays
Inclusive: Transmitter CableTracer TX, receiver RECV, connecting
cable, test prods, test clamps, batteries, carrying case
For more detailed
information, go to
www.laserliner.com!
CableTracer TX
Inclusive: Transmitter CableTracer TX, connecting
cable, test prods, test clamps, battery
ELECTRICAL METERS
Transmitter/receiver line testers – Measurement with transmitter and receiver. The sender feeds coded signals into the cable to be
checked. The signal is a modulated current that creates an electromagnetic Ö eld about the conductor. The receiver recognises
this Ö eld, decodes it and is then able to Ö nd and locate cables with this signal. Ideal for taking stock of electrical installations
and metal line systems.
Inaccessible cables:
Line detection up to
measuring depth of 1 m –
e.g. suspended ceilings or
underground cables
Easy location
of fuses in
switch boxes
GP_04_01_2010_22-27.indd 27 17.01.2011 9:39:31 Uhr