Operation Manual

11
SmartLine-Laser 360°
4
LASER LASER LASER LASER LASER
Subject to technical changes without notice. 04.2013
GB
Slope mode
Do not release the transport restraint, set the ON/OFF switch to „OFF“.
Select and switch on the laser with the selection button. Sloping planes
can now be measured. This mode cannot be used to perform horizontal
or vertical levelling as the laser lines are no longer aligned automatically.
The LED lights constantly red.
Technical data
Self-levelling range ± 5°
Accuracy ± 0.4 mm / m
Operating range (depending on room illumination) 20 m
Working range with hand receiver (depends on how
the technology affects the difference in brightness)
10 - 30 m
Laser wavelength 635 nm
Laser class / line laser output power 2 / < 1 mW
Power supply
4 x 1.5V alkaline batteries
(type AA, LR6)
Operating time approx. 35 hours
Operating temperature 0°C ... +40 °C
Storage temperature -10°C ... +70 °C
Dimensions (W x H x D) 75 x 130 x 100 mm
Weight (incl. batteries) 525 g
Due to the special optics required to generate a continuous 360° laser
line, the underlying technology may cause differences in brightness in
different areas of the line. This may lead to different ranges in hand
receiver mode.
!
Manual_SmartLineLaser360_Rev.0413.indd 11 13.05.13 09:18