User Manual

16
GB
DC current measurements
True RMS (ACA / ACV)
5
4
t
u
-Û
0
+Û
1. Turn the rotary switch to position „200A DC“ and press
and hold the „MAX/MIN“ button for 2 seconds to reset
the device.
2. Place the Current clamp around a line.
3. The measured value is shown on the LC display. By pressing
the „MAX/MIN“ button, the minimum and maximum values
are measured and displayed.
1. 2.
correct incorrect
AC/DC voltage measurements6
1. Connect the red test prod to the V Ć input socket (12) and
the black test prod to the COM input socket (8).
2. Turn the rotary switch to position „V AC/DC“.
The device displays the „AC“ voltage mode. Press the
„MAX/MIN“ button and hold it down for 2 seconds to
measure the DC voltage.
3. Connect the measuring contacts to the object to be tested.
1.
Black
Red
2. 3.
Red
Black
12
3
4
When measuring AC voltage/current,
the device displays the true RMS value
regardless of the wave form.
Peak value
Peak-to-peak value
RMS value
Cycle duration
1
2
3
4
Manual_MultiClamp-Meter_Rev.0710_GB.indd 16 12.08.2010 16:10:26 Uhr