User Manual

MultiClamp-Meter Pro

Symbols

Danger area warning

Hazardous electrical voltage warning:

Unprotected live components inside the device

housing may pose a risk of electric shock.

Protection class II: The test device has

reinforced or double insulation.

Overvoltage category III: Equipment in Ö xed

installations and for applications where speciÖ c

requirements with regard to the reliability and

availability of equipment have to be met, e.g.

circuit-breakers in Ö xed installations and devices

used in industrial applications which are perma-

nently connected to the Ö xed installation.

• If the device comes into contact with moisture or other con-

ductive residue, work must not be carried out under voltage.

At and above voltages of 25 V AC/60 V DC, the presence of

moisture creates the risk of life-threatening electric shocks.

Clean and dry the device before use. When using the device

outdoors, make sure that the weather conditions are appropri-

ate and/or that suitable protection measures are taken.

• If you are taking measurements in the hazardous vicinity of

electrical installations, do not work alone and seek guidance

from an electrically skilled person before starting work.

• Isolate the device from all current sources before opening the

battery compartment cover.

• If possible, do not work alone.

Manual_MultiClamp-Meter_Rev.0710_GB.indd 13 12.08.2010 16:10:21 Uhr