operation manual

16
GB
Function Maximum limit values
V DC / V AC 300 V DC, 300 V AC
A DC
10 A DC (> 2 A max. 10 seconds
every 15 minutes)
Batteries 9 V
Maximum limit values
Replacing the battery / fuses
To replace the battery or fuses, rst disconnect the test prods from
their voltage source and then from the device. Undo all the screws
at the rear of the device and replace the battery or replace the
defective fuse by a fuse of the same type and rating. Do not touch
the green pc-board. Also make sure it is kept clean. Close the
housing and carefully screw the meter back together. Do not switch
on the device with the cover open.
1
1
2
3
1
F 250 mA / 300 V (Ø 5 mm x 20 mm)
2
F 10 A / 300 V (Ø 5 mm x 20 mm)
3
1 x 9 V NEDA 1604 / IEC 6F22