Operating instructions

24
GB
With the software provided on the CD it is possible to transfer the recorded
data to a PC and to use the data for further processing and documentation.
Load the CD in the drive and follow the installation routine. After successful
installation, start the application. Connect one end of the supplied USB cable
to the mini-USB port of the device and the other end to a free USB port on
your computer.
For further information on how to use the software, refer to the software
manual on the DVD that contains a detailed description of the functions.
USB data transfer
16
2.
3.
1.
Error messages
15
Error code
Description
Err1, Err2, Err3
Sensor not connected properly.
Deviating signal.
Err 1
Error in eddy current sensor
Err 2
Error in magnetic induction sensor
Err 3
Error in both sensors
Err 4, Err 5, Err 6
reserved
Err 7
Error in coating thickness
If errors consistently recur, please contact your specialist dealer or the
Laserliner service personnel.
!