Operation Manual

AC-tiveMaster PD
13
Subject to technical alterations. 06.2010
Technical data
Voltage range 12, 24, 36, 50, 120, 230, 400,
690 V AC/DC
LEDs ± 12, 24, 36, 50, 120, 230,
400, 690 V AC/DC
Tolerance -30% to 0% of the reading
Voltage detection Automatic
Polarity detection Entire range
Range detection Automatic
Response time < 0.1 s, LED
Frequency range 50/60 Hz
Automatic load (RCD/FI) Yes
Internal base load Approx. 2.1 W at 600 V
Peak current 1s < 0.2 A / Is (5 s) < 3.5 mA
ON time ON time = 30 s/10 min.
Single-pole phase test
Voltage range 100 to 690 V AC
Frequency range 50/60 Hz
Continuity test
Resistance range < 300 Ć
Testing current 5 ĉA
Overvoltage protection 690 V AC/DC
Indication of rotating Ƃ eld direction
Voltage range (LEDs) 100 to 400 V
Frequency range 50/60 Hz
Measuring principle Two-pole with contact electrode
Power supply 2x 1.5 Type AAA, LR03, alkaline
Power consumption Max. 30 mA / approx. 250 mW
Operating temperature -10°C ... 55°C
Humidity Max. 85% relative air humidity
Overvoltage category CAT III - 1000 V / CAT IV - 600 V
Pollution degree 2
Degree of protection IP64
Weight 220 g
Test standards EN 61243-3; EN 61326
GB
Manual_AC-tiveMaster_Rev.0610_GB.indd 13 27.07.2010 14:27:24 Uhr