Manual

18
Filter reset
Toresettheltersaturationdisplay,pressandholdtheDisplaybutton(13)for5seconds.
Thisfunctionisonlyavailableafterthedevicehasregisteredthelterhasbeenchanged.
Display lighting
To switch the air quality colour display on and off, press the Display button (13).
UV-C function (including ionisation)
Press the Anti-virus button (12) to start UV-C radiation and disinfection. Press and hold the button for
vesecondstostarttheioniser.
Adjusting the fan speed
Fourfanspeedscanbeselected.
Functions
3
Explanation PM 2.5
4
PM 2.5 0 ~ 50 μg/m
3
50 ~ 100 μg/m
3
100 ~ 150 μg/m
3
150 μg/m
3
~
Coloured indicator blue green purple red
Status perfect good normal poor
PM2.5neparticulatematterincludesindustrialemissionswhichcanpenetratedeepintotherespiratorytractdue
to their extremely small size, causing long-term damage to the lungs.
Note: Press the Display button (13) if you want to switch off the air quality display.
!
Sleep mode
In sleep mode, the light sensor is activated which assesses the ambient light level. If the light level is low,
alllitdisplaysonthedevicearedimmedandthefanisalsoautomaticallysettoitslowestspeed.
Set timer
Pressthebutton(10)toactivatetheautomaticshutdownafter1,4or8hours.
EN