Instructions

20
1x 2x 3x 4x
1x 2x 3x 4x
01 … 50
The device has 50 storage locations.
Memory function:
To calibrate the tilt sensor follow the instructions on the display.
Tilt sensor calibration:
The digital bubble level is used to horizontally align the measuring device.
Digital bubble level:
Angle function 3:
Angle 1. measurement 2. measurement
function 3
The back of the device can be used as a reference surface
for measuring angles.
!
The back of the device can be used as a reference surface
for measuring angles.
!
Results
The measurement results are determined automatically by the 360°
inclination sensor.
The measurement results are determined automatically by the 360°
inclination sensor.
Results
Angle function 2:
Angle 1. measurement 2. measurement
function 2
EN