LaserLine Manufacturing, Inc. T-2000SD Owner’s Manual Long Range Alignment Laser 1810 SE First Street, Suite H, Redmond, OR 97756 Phone 541 548 0882 • Fax 541 548 0892 • Email laserline@empnet.com Website www.LaserLineMfg.
©2005 LaserLine Manufacturing, Inc.
Product Description The T-2000SD was designed for long range alignment applications. The T-2000SD is a modular or “building block” design that allows the laser to be upgraded from its basic form. This enables the contractor to configure the laser based on the specific application and job site needs.
LASER LASERSAFETY SAFETY LASER SAFETY LASER SAFETY When Class IIIa with ananoutput ofof watts (5mW): When operating IIIa lasers with anoutput output ofless lessthan than 0.005 (5mW): Whenoperating operating ClassClass IIIalasers lasers with less than0.005 0.005watts watts (5mW): 1.1. Operators and crewmembers shall read this manual and become familiar with all-operating 1.
LASER SAFETY (Continued) The T-2000SD Series Laser is a Class IIIa Laser Product generat- CAUTION! The use of optical instruments with this prod- ing less than 5 milliwatts of Laser Light. Class IIIa Lasers are used uct will increase eye hazard. every day in construction and alignment applications. With Viewing the laser beam or a reflection of the beam with optics, every use, eye safety is a consideration.
LASER SAFETY (Continued) This laser complies with all applicable Health (Federal Register, Volume 40, Caution! DO NOT disassemble the portions of Title 21 of the Code of Fed- No.148, July 31, 1975). laser head or attempt to perform any eral Regulations, Department of Health, Note: The T-2000SD is a Class IIIA Education, and Welfare, Food and Drug laser in the United States and in most administration, Bureau of Radiological countries. internal servicing.
Precautions for Handling Instrument 1. Carry the instrument in its case whenever transporting it ods of time, in applications like dredging, it is highly recom- between jobs. mended that the laser be set up in an enclosure or “house” to protect it from the elements. 2. When carrying the instrument while on a tripod, do not carry it over the shoulder, but cradled in an under arm position. 6. Do not expose the instrument to rain.
Product Nomenclature 1. Instrument Mount 8. Laser Housing 14. 8-40 Screws for Weaver Mount 2. Power Connector 12 VDC 9. Laser Collimator 15. Lower Scope Mount 3. Emission Indicator 10. Fan Lens Mount Ring 4. Horizontal Lock 11. Fan Lens (Optional) 5. Horizontal Tangent 6. Vertical Lock 12. Scope Adaptor with 8-40 Tapped Holes for Weaver #63B 7. Vertical Tangent 13. Weaver #63B Scope Mount 7 20. Tribrach Adapter (Required to Adapt Tribrach) 16. Upper Scope Mount 21.
Product Specifications Laser Power 4.6mw nominal. Weight: T-2000SD w/scope and Tribrach 13lbs. (5.9 kilos) Operating temperature -5 to +20F (-18 to +50C). Power 10 to 14 VDC at 1.5 amps per hour (AC adaptor Available 1140-3) Storage temperature -40 to + 150F (-40 to+65C). Laser beam Spot Size: Base 5/8 X 11 Threads/inch At exit 0.87” (2.2cm) Dimensions: 500’ (152M) 0.8” (2.0cm) Length 9-1/2” (24.13cm) 1000’ (305M) 1.1” (2.8cm) Width 5-1/2” (14cm) 1500’ (457M) 1.4” (3.
LaserLine MFG., Inc. Service Center provides trained personnel using authorized replacement parts to ensure the highest quality and fast turnaround. If any part of your T-2000SD should require servicing, contact LaserLine MFG., Inc. at 541-548-0882. 1810 SE First Street, Suite H, Redmond, OR 97756 Phone 541 548 0882 • Fax 541 548 0892 • Email laserline@empnet.com Website www.LaserLineMfg.
